師資人員	首頁師資人員專任教師

陳志臣 教授兼副校長　Chen, Jyh-Chen 辦公室： (Office) E4-362 專線電話： (Tel) 03-4267321 校內分機： (Campus Extension) 34321 傳真電話: (Fax) 03-4254501 E-mail： jcchen@cc.ncu.edu.tw

	學經歷 (Education & Experiences)
	學歷： 美國亞利桑那州立大學機械系博士(Ph.D., Dept. of Mechanical Engineering, The Arizona State University, USA) 現職： 國立中央大學　副校長 (20182–迄今) (Vice President, National Central University, Taiwan, 201821-present) 國立中央大學　教務長 (20138–迄今) (Vice President for Academic Affairs, National Central University, Taiwan, 201381-present) Executive Editor, Journal of Taiwan Energy, 2018-present Member of the Editor Board, Journal of Advanced Technology and Management, 2010-present Associate Editor, Journal of Mechanics, 2008-present Member of the Editor Board, Advances and Applications in Fluid Mechanics(2006-present) 國立中央大學　機械系教授 (19908–迄今) (Professor, Department of Mechanical Engineering, National Central University, 19908-present) 主要經歷: 中華民國力學學會理(2012–2017) 行政院節能減碳辦公室顧問(2016) 科技部工程司傑出研究獎評議委員(2014-2017) 經濟部能源局諮議委員(2015-2017) 經濟部能源局「能源領域研究計畫績效考評會」委員(2013-2018) 中國機械工程學會理事(2013-2014) (Coordinator, Thermal-Fluid Science and Energy Division, National Science Council, 200411-20071231) 國立中央大學工學院院長(20092–20137) (Dean, College of Engineering, National Central University, 200921-2013731) 國立中央大學特聘教授(2005-2007) 國科會熱流暨能源學門召集人 (20041–200712) 國立中央大學主任秘書 (20038–20067) (Secretary General, National Central University, 200381-2006731) 美國喬治亞理工學院　機械系訪問學者 (1999) (Visiting Scholar, Mechanical Engineering Department, Georgia Institute of Technology, USA, 1999) 國立中央大學機械系系主任 (19958–19987) (Chairman, Mechanical Engineering Department, National Central University, 199581-1998731) 國立中央大學機械系副教授 (19868–19907) (Associate Professor, Department of Mechanical Engineering, National Central University, 198681-1990731)

	教授課程 (Courses Taught)
	能源概論(Introduction of energy) 能源工程(Energy engineering) 應用熱傳(Applied heat transfer) 高等熱傳(Advanced heat transfer)

	研究專長 (Research Areas)
	LED熱管理技術研發(Thermal Management of LED System) 製程熱流分析(Transport Phenomena) 晶體生長設備設計及開發(Design and Development of Optoelectronic and semiconductor equipment) 光電晶體生長(Optoelectronic Crystal Growth)

	實驗室 (Laboratory)
	晶體生長與熱流分析實驗室 E2-116 晶體生長與熱流分析實驗室 E2-216

論文著作 (Publications)　(僅列出最近五筆資料) 【下載完整著作目錄】

※ 瀏覽更多論文著作

題目 作者姓名 期刊名稱 出版 年份 期別及 起訖頁數 期刊種類 Numerical investigation of the forward and backward thermocapillary motion of a water droplet in a microchannel by two periodically activated heat sources T.-L. Le, J.-C. Chen*, H.-B. Nguyen Numerical Heat Transfer, Part A: Applications 2021 Vol. 79, pp. 146–162 SCI Effects of crystal-crucible iso-rotation and a balancedunbalanced cusp magnetic field on the heat, flow, and oxygen transport in a Czochralski silicon melt T. H.-T. Nguyen, J. C. Chen*, C. Hu, C.-H. Chen Journal of Crystal Growth 2020 Vol, 531, 125373. SCI Efficiency droop reduction in InGaNGaN light-emitting diodes by improving the current spreading with electron-blocking layers the same size as the as the n-pad Q.-H. Pham, J.-C. Chen*, H.-B. Nguyen Current Optics and Photonics 2020 Vol. 4, No. 4, pp. 380-390. SCI Effect of crucible and crystal rotations on the solute distribution in large size sapphire crystals during Czochralski growth T.-P. Nguyen, J.-C. Chen International Journal of Heat and Mass Transfer 2019 Vol. 130, pp. 1207-1321 SCI Numerical simulation of heat and mass transfer during Czochralski silicon crystal growth under the application of crystal-crucible counter- and iso-rotation T. H.-T. Nguyen, J. Chen Chen, C. Hu, C.-H. Chen Journal of Crystal Growth 2019 Vol. 507, pp. 50-57 SCI

	榮譽事蹟 (Honors and Awards)
	國立中央大學獎座教授(2008-present) (Chair Professor, National Central University, 2008-present) 中國工程師學會傑出工程教授獎(2016) (Distinguished Engineering Professor Award, Chinese Institute of Engineers, 2016) 國科會傑出技轉貢獻獎(2013) (Distinguished Technology Transfer Award, National Science Council, 2013) 第二屆上銀優秀博士論文獎銀獎(2012) 國科會傑出學者研究計畫(2008-2011) (Distinguished Research Scholar Project, National Science Council, 2008-2011) 中國機械工程學會傑出工程教授獎(2006) (Distinguished Engineering Professor Award, Chinese Society of Mechanical Engineers, 2006) 國科會傑出研究獎(2004) (Distinguished Research Award, National Science Council, 2004) 教育部教學特優教師(1992) (Distinguished Teaching Award, Ministry of Education, 1992) Conference Chair, 2018 International Conference on Machining, Materials and Mechanical Technologies (2018) Plenary Speaker, Asian Conference on Thermal Sciences (2017) Conference Chair, 2016 International Conference on Machining, Materials and Mechanical Technologies (2016) Keynote Speaker, The International Conference on Sustainable Agriculture, Food and Energy (2016) Keynote Speaker, The 2nd International Conference on Mechanical Engineering (2015) Invited Speaker, China Semiconductor Technology International Conference (2015) Conference Chair, 2014 International Conference on Machining, Materials and Mechanical Technologies (2014) International Scientific Committee Member, 2014 International Conference on Applied Energy (2013) Section Chair, 2012 Energy & Materials Research Conference (2012) Section Chair, 2012 Taiwan Symposium on Carbon Dioxide Capture, Storage and Utilization (2012) Conference Co-Chair and Section Chair, 7th International Workshop on Modeling in Crystal Growth (IWMCG-7)(2012) Invited Speaker, 7th International Workshop on Modeling in Crystal Growth (IWMCG-7) (2012) Invited Speaker, 19th Computational Fluid Dynamics Conference in Taiwan (2012)

專利 (Patents)　(僅列出最近五筆資料)

※ 瀏覽更多專利

類別 專利申請案件名稱 國別 發明人 提申案號/證書號/權利期間 專利簡介 發明 Light emitting device 歐洲 陳志臣、許國君、胡凡勳 EP1791187B1 2009-2028 發明 Method of fabricating porous aluminum oxide mold having sub-micron structure and methods of imprinting to make LEDs using the mold 美國 李有璋、杜昇翰、陳志臣、張正陽 7,588,953 B2 2009-2028 發明 Method of fabricating periodic domain inversion structure 美國 陳志臣、江昌鴻、李有璋、簡政尉 7,642,040 B2 2010-2029 發明 Method of fabricating periodic domain inversion structure 日本 陳志臣、江昌鴻、李有璋、簡政尉 特許第4436848 2010-2029 新型 長晶爐之熱遮罩結構 中華民國 陳志臣、呂中偉、陳學億、鄧應揚、溫婉婷、許松林、謝兆坤、陳智勇、藍文傑、陳敬智 新型第M378934號 2010-2019