題目 |
作者姓名 |
期刊名稱 |
出版
年份 |
期別及
起訖頁數 |
期別種類 |
Gas Forming a V-Shape Aluminum Sheet into a Trough of Saddle Contour |
Shyong Lee, H.C. Lan, J. Lee, J.Y. Wang, J.C. Huang and C.L.Chou |
Journal of Materials Engineering and Performance |
2012 |
21期,P.2290-P.2294 |
|
Comparison of Oxidation Behaviors among three Fe-Cr based Alloys for Solid Oxide Fuel Cell Interconnect |
Y. N. Chen, C. L. Chu and Shyong Lee |
Corrosion Engineering Science and Technology |
2012 |
47期,P.25-P.30 |
|
Effects of Bias on Properties of Ti-C:H Films Coated by Filtered Cathodic Vacuum Arc |
Shyong Lee, C. L. Chu, J. Gwo, J. J. Huang, M. J. Tsai |
Surface Engineering |
2011 |
27期,P.531-P.535 |
|
Superplastic Elongation Characteristic of Fine Grained Magnesium Alloy ZK60 |
Shyong Lee, C. T. Chiang, J. S. Leu, and Y. H. Chen |
Rare Metals |
2010 |
vol.29, P.421-P.425 |
|
Rolling Route for Refining Grains of super light Mg-Li Alloys Containing Sc and Be |
C. T. Chiang, Shyong Lee, C. L. Chu |
Transactions of Nonferrous Metals Society of China |
2010 |
vol.20, P.1374-P.1379 |
|
Inter-granular liquid phase aiding grain boundary sliding in superplastic deformation of finr-grained Mg alloy ZK60 |
Shyong Lee, C. T. Chiang, J. S. Leu, C. L. Chu and C. C. Hsu |
Transactions of Nonferrous Metals Society of China |
2010 |
vol.20, P.576-P.579 |
|
Deformation characteristics of fine-grained magnesium alloy AZ31B thin sheet during rapid gas blow forming |
P. H. Sun, H. Y. Wu, W. C. Hsu, H. H. Tsai, C. C. Huang, Shyong Lee |
Materials Science and Technology |
2010 |
vol.26, P.1095 |
|
High Temperature Oxidation Behavior of Interconnect Coated with LSCF and LSM for Solid Oxide Fuel Cell by Screen Printing |
Shyong Lee, C. L. Chu, M. J. Tsai and J. Lee |
Applied Surface Science |
2010 |
vol.256, P.1817-P.1824 |
|
La0.6Sr0.4Co0.2Fe0.8O3 protective coatings for solid oxide fuel cell interconnect deposited by screen printing |
M. J. Tsai, C. L. Chu, Shyong Lee |
J. of Alloys and Compounds |
2010 |
vol.489, P.576-P.581 |
|
Strengthening and Room Temperature Age-Softening of Super-Light Mg-Li Alloys |
Jyh-Shyan Leu, Chih-Te Chiang, Shyong Lee, Yung-Hung Chen, and Chun-Lin Chu |
J. of Materials Engineering and Performance |
2009 |
vol.19, P.1235-P.1239 |
|