題目 |
作者姓名 |
期刊名稱 |
出版
年份 |
期別及
起訖頁數 |
期別種類 |
Effect of Trace La Addition on the Microstructures and Mechanical Properties of A356 (Al-7Si-0.35Mg) Aluminum Alloys |
Y.-C. Tsai, C.-Y. Chou, S.-L. Lee, C.-K. Lin, J.-C. Lin, and S.-W. Lim |
Journal of Alloys and Compounds |
2009 |
Vol. 487, Nos. 1-2, pp. 157-162 |
SCI |
Effects of Clamping Load on the Thermal Stress Distribution in a Planar SOFC with Compressive Sealing |
C.-K. Lin, L.-H. Huang, L.-K. Chiang, and Y.-P. Chyou |
ECS Transactions |
2009 |
Vol. 25, No. 2, pp. 349-358 |
EI |
Thermal Stress Analysis of Planar Solid Oxide Fuel Cell Stacks: Effects of Sealing Design |
C.-K. Lin, L.-H. Huang, L.-K. Chiang, and Y.-P. Chyou |
Journal of Power Sources |
2009 |
Vol. 192, No. 2, pp. 515-524 |
SCI |
High Temperature Mechanical Properties of a Glass Sealant for Solid Oxide Fuel Cell |
H.-T. Chang, C.-K. Lin, and C.-K. Liu |
Journal of Power Sources |
2009 |
Vol. 189, No. 2, pp. 1093-1099 |
SCI |
Effects of Continuously Applied Stress on Tin Whisker Growth |
C.-K. Lin and T.-H. Lin |
Microelectronics Reliability |
2008 |
Vol. 48, No. 10, pp. 1737-1740 |
SCI |
Effects of R-ratio on High-Temperature Fatigue Crack Growth Behavior of a Precipitation-Hardening Stainless Steel |
K.-C. Hsu and C.-K. Lin |
International Journal of Fatigue |
2008 |
Vol. 30, No. 12, pp. 2147-2155 |
SCI |
Finite Element Analysis of Thermal Stress Distribution in Planar SOFC |
C.-K. Lin, T.-T. Chen, A.-S. Chen, Y.-P. Chyou, and L.-K. Chiang |
ECS Transactions |
2007 |
Vol. 7, No. 1, pp. 1977-1986 |
EI |
Notch Effect on the Corrosion Fatigue Behavior of an Austenitic Stainless Steel |
C.-K. Lin and P.-F. Kuo |
Key Engineering Materials |
2007 |
Vols. 345-346, pp. 995-998 |
EI |
Low-Cycle Fatigue Behavior of AISI 347 Stainless Steel in Salt Water |
C.-K. Lin and C.-H. Chiu |
Journal of Materials Science |
2007 |
Vol. 42, No. 1, pp. 40-49 |
SCI |
Influence of Frequency on the High-Temperature Fatigue Crack Growth Behavior of 17-4 PH Stainless Steels |
K.-C. Hsu and C.-K. Lin |
Materials Transactions |
2007 |
Vol. 48, No. 3, pp. 490-499 |
SCI |