| 題目 |
作者姓名 |
期刊名稱 |
出版
年份 |
期別及
起訖頁數 |
期別種類 |
| Rapid Forming of Superplastic Aluminum Alloy 5083 |
Shyong Lee, H. Y. Wu, Y. H. Yu, J. Y. Wang and C. P. Chang |
Materials Science and Technology |
2001 |
vol.17 |
|
| Effect of Bonding Variables on the Bonding Mechanisms in Press Bonding a Superplastic 8090 Aluminum Alloy |
H. Y. Wu and Shyong Lee |
Materials Science and Technology |
2001 |
vol.17, P.906-P.911 |
|
| Effects of Surface Treatment on the Press-Bonding Characteristics of Superplastic 7475 Aluminum Alloy |
H. Y. Wu, Shyong Lee and Y. S. Jou |
Journal of Materials Science and Engineering |
2000 |
vol.32, P.83-P.90 |
|
| Feasibility and Reliability of Genuine Solid State Press Bonding of Aluminum Alloy 5083 |
Shyong Lee, Y. H. Yu, J. Y. Wang, H. Y. Wu |
Journal of Key Engineering Materials |
2000 |
vols.177-180, P.81-P.86 |
|
| Solid State Bonding of Iron-based Alloys, Steel-Brass, and Aluminum Alloys |
H. Y. Wu, Shyong Lee and J. Y. Wang |
Journal of Materials Processing Technology |
1998 |
vol.75, P.173-P179 |
|
| Thickness Distribution in a Superplastically Formed Rectangular Pan under Plane Strain Conditions |
Shyong Lee |
Journal of Materials Processing Technology |
1997 |
vol.65, P.59-P64 |
|
| Superplastic Forming of an Al-Li-Cu-Mg-Zr Alloy Using Varied Forming Paths |
H. Y. Wu, J. T. Chern and Shyong Lee |
Journal of Materials and Manufacturing Processes |
1995 |
vol.10, P.1-P.11 |
|
| Methods for Revolving Grooving Problems in Parts Manufactured from Combined Diffusion Bonding and Superplastic Forming Process |
J. H. Cheng and Shyong Lee |
Journal of Materials Processing Technology |
1994 |
vol.45, P.249-P.254 |
|
| Fracture Analysis of a Steel Sandwich with Hardened Core |
Shyong Lee, C. Y. Wang and J. Lee |
International Journal of Fracture |
1994 |
vol.65, P.173-P.181 |
|
| Comparison of Superplastic Formability Predictions Using 2-D Plane Strain and 3-D Modeling |
Shyong Lee and Jye Lee |
Journal of Materials and Manufacturing Processes |
1994 |
vol.9, P.45-P.57 |
|
師資人員
首頁
師資人員
