Conferences papers

List of Conferences' papers

  1、

Lin, T.-Y., Chen, C.-W., Yang*, C.-Y. and Kandlikar, S. G., 2014, “Experimental Investigation on Friction Characteristics and Heat Transfer of Air and CO2 Flow in Microtubes with Structured Surface Roughness,” Heat Transfer Engineering, Vol. 35, No. 2, pp. 150-158. (SCI)

  1、

Yang, C.-Y. and Liu, C.-F., 2013, “Visualization of Boiling Heat Transfer on Micro Porous Coated Surface in Confined Space,” 11th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2013, June 16-19, 2013, Sapporo, Japan.

  2、

Liu, C.-F. and Yang, C.-Y., 2013, “Effect of Gap Size for Pool Boiling Heat Transfer on Micro Porous Coated Surface in Confined Space,” 8th International Conference on Multiphase Flow, ICMF 2013, Jeju, Korea, May 26 - 31, 2013.

  3、

Yang, C.-Y. and Liu, W.-C., 2013, “A Novel Liquid Cooling System for High Power LED Street Lamp,” IEEE Semiconductor Thermal Measurement & Management Symposium, San Jose, CA USA.

  4、

Yang, C.-Y., Lin, Y.-H. and Hsu, T.-W., 2012, “An Experimental Investigation on Refrigerant-Water Flow Distribution and Heat Transfer in Plate Heat Exchangers with Inlet Distributor,” Ninth International Conference on Flow Dynamics September 19 - 21, 2012, Sendai, Japan.

  5、

Yang, C.-Y., Lin, Y.-H. and Hsu, T.-W., 2012, “An Experimental Investigation on Refrigerant-Water Flow Distribution and Local Heat Transfer Performance in Plate Heat Exchangers,” 11th Quantitative InfraRed Thermography, Naples, Italy, June 11-14.

 

6、

Yang, C.-Y. and Lin, Y.-H., 2012, “Effect of Flow Direction for the Heat Transfer Performance of Refrigerant R-410A Evaporated in Plate Heat Exchanger,” ECI 8th International Conference on Boiling and Condensation Heat Transfer, Ecole Polytechnique Fédérale de Lausanne, 3-7 June, Lausanne, Switzerland.

  7、

Wu, J.-C., Lin, Y.-H., Chu, Y.-C., Meng, F.-Y. and Yang, C.-Y., 2012, “An Experimental and Numerical Analysis on the Flow Distribution in a Plate Heat Exchanger with Inlet Distributor,” Sixth International Conference on Thermal Engineering: Theory and Applications, May 29-June 1, Istanbul, Turkey.

  8、

Lin, T.-Y., Chen, C.-W., Yang, C.-Y. and Kandlikar, S. G., 2011, “An Experimental Investigation on Friction Characteristics of Air Flow in Microtube with Structured Surface Roughness,” 3rd Micro and Nano Flows Conference Thessaloniki, Greece, 22-24 August 2011.

  9、

Chen, C.-W., Lin, T.-Y., Yang, C.-Y. and Kandlikar, S. G., 2011, “An experimental investigation on heat transfer characteristics of air and CO2 in microtubes,” the 9th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2011 June 19-22, 2011, Edmonton, Canada.

  10、

Liu, W.-C., Chao, C.-H. and Yang, C.-Y., 2010, “A study on heating/cooling apparatus design and temperature control for hot embossing system,” The 27th Chinese Society of Mechanical Engineers Annual Meeting, December 10~11, Taipei. (in Chinese)

  11、

Yang, C.-Y. and Chen, Y.-W., 2010, “Design of CO2 Flat Micro Tubes Parallel Flow Evaporators,” The 27th Chinese Society of Mechanical Engineers Annual Meeting, December 10~11, Taipei. (in Chinese)

  12、

Chen, C.-W., Chen, Y.-W., Chen, H.-M., Lai, S.-H. and Yang, C.-Y., 2010, “The Comparison of Heat Transfer Performance for Gas Coolers in CO2 Heat Pump, The 27th Chinese Society of Mechanical Engineers Annual Meeting, December 10~11, Taipei. (in Chinese)

  13、

Chou, C.-Y., Lin, Y.-H. and Yang, C.-Y., 2010, “An Experimental Analysis on R-410A Evaporation Heat Transfer in Plate Heat Exchangers,” The 27th Chinese Society of Mechanical Engineers Annual Meeting, December 10~11, Taipei. (in Chinese)

  14、

Yang, C.-Y., Yeh, C.-T., Wang, P.-K., Liu, W.-C. and Kung, Edward Y.-C., 2010, “An In-situ Performance Test of Liquid Cooling for a Server Computer System,” International Microsystems, Packaging, Assembly and Circuit Technology Conference (IMPACT), August 20~22, Taipei, Taiwan.

  15、

Yang, C.-Y. and Liu, C.-F., 2010, “Effect of Coating Layer Thickness for Pool Boiling Heat Transfer on Vertical Micro Porous Coated Surface in Confined Space,” Proceedings of the International Heat Transfer Conference, IHTC14, August 8-13, 2010, Washington, DC, USA

  16、

Yang, C.-Y. and Liu, W.-C., 2010, “An Experimental Study on Convective Boiling Heat Transfer in Micro Heat Exchangers,” Proceedings of ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels, and Minichannels, FEDSM2010-ICNMM2010, August 1-5, 2010, Montreal, Canada.

  17、

Yang, C.-Y., 2010, “The Trend and Forecast of Air Condition and Refrigeration Technologies,” Advanced Air Condition and Refrigeration Technology Workshop, Chung-Li, Taiwan. (in Chinese)

  18、

Lin, T.-Y., Chen, C.-W., Yang, C.-Y. and Kandlikar, S. G., 2011, “An Experimental Investigation on Friction Characteristics of Air Flow in Microtube with Structured Surface Roughness,” 3rd Micro and Nano Flows Conference Thessaloniki, Greece, 22-24 August 2011.

  19、

Chen, C.-W., Lin, T.-Y., Yang, C.-Y. and Kandlikar, S. G., 2011, “An experimental investigation on heat transfer characteristics of air and CO2 in microtubes,” the 9th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2010 June 19-22, 2011, Edmonton, Canada.

  20、

Liu, W.-C., Chao, C.-H. and Yang, C.-Y., 2010, “A study on heating/cooling apparatus design and temperature control for hot embossing system,” The 27th Chinese Society of Mechanical Engineers Annual Meeting, December 10~11, Taipei. (in Chinese)

  21、

Yang, C.-Y. and Chen, Y.-W., 2010, “Design of CO2 Flat Micro Tubes Parallel Flow Evaporators,” The 27th Chinese Society of Mechanical Engineers Annual Meeting, December 10~11, Taipei. (in Chinese)

  22、

Chen, C.-W., Chen, Y.-W., Chen, H.-M., Lai, S.-H. and Yang, C.-Y., 2010, “The Comparison of Heat Transfer Performance for Gas Coolers in CO2 Heat Pump, The 27th Chinese Society of Mechanical Engineers Annual Meeting, December 10~11, Taipei. (in Chinese)

  23、

Chou, C.-Y., Lin, Y.-H. and Yang, C.-Y., 2010, “An Experimental Analysis on R-410A Evaporation Heat Transfer in Plate Heat Exchangers,” The 27th Chinese Society of Mechanical Engineers Annual Meeting, December 10~11, Taipei. (in Chinese)

  24、

Yang, C.-Y. and Liu, C.-F., 2010, “Effect of Coating Layer Thickness for Pool Boiling Heat Transfer on Vertical Micro Porous Coated Surface in Confined Space,” Proceedings of the International Heat Transfer Conference, IHTC14, August 8-13, 2010, Washington, DC, USA

  25、

Yang, C.-Y. and Liu, W.-C., 2010, “An Experimental Study on Convective Boiling Heat Transfer in Micro Heat Exchangers,” Proceedings of ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels, and Minichannels, FEDSM2010-ICNMM2010, August 1-5, 2010, Montreal, Canada.

  26、

Yang, C.-Y., 2010, “The Trend and Forecast of Air Condition and Refrigeration Technologies,” Advanced Air Condition and Refrigeration Technology Workshop, Chung-Li, Taiwan. (in Chinese)

  27、

Yang, C.-Y. and Liu, C.-F., 2009, “Visualization of Pool Boiling Heat Transfer on Vertical Micro Porous Coated Surface in Confined Space,” The 7th Pacific Symposium on Flow Visualization and Image Processing, PSFVIP-7, Kaohsiung, Taiwan, Nov. 16-19.

  28、

Yang, C.-Y., Lin, Y.-H. and Lo, H.-T., 2009, “An Experimental Study on Pressure Drop of Inlet and Exit Manifolds and Ports of Plate Heat Exchangers,” The 7th International Conference on Experimental Heat Transfer, Fluid Flow and Thermodynamics, (ExHFT-7),” 28 June - 03 July 2009, Krakow, Poland

  29、

Lin, T.-Y., Yang, C.-Y. and Kandlikar, S. G., 2009, “Measurement of heat transfer in the entrance region of small diameter tubes,” the Seventh International ASME Conference on Nanochannels, Microchannels and Minichannels, (ICNMM2009),” June 22-24, 2009, Pohang, South Korea.

  30、

Yang, C.-Y., Yeh, C.-T., Huang, K.-C. and Tsai, S.-N., 2009, Development of a mini liquid cooling system for high heat flux electronic devices,” the Seventh International ASME Conference on Nanochannels, Microchannels and Minichannels, (ICNMM2009),” June 22-24, 2009, Pohang, South Korea. (keynote)

  31、

Yang, C.-Y., 2008, “High Heat Flux Liquid Cooling Technology,” Workshop for Liquid Cooling Technology, Taipei. (in Chinese)

  32、

Yang, C.-Y. and Liu, C.-F., 2008, “Pool Boiling Heat Transfer on Vertical Micro Porous Coated Surface in Confined Space,” The Sixth International ASME Conference on Nanochannels, Microchannels and Minichannels (ICNMM2008),” June 23-25, 2008, Darmstadt, Germany

  33、

Yang, C.-Y. Chen, C.-W. and Hu, Y.-T., 2008, “Heat Transfer Enhancement of Air Cooled Heat Exchanger with Spray Cooling,” The Fifth International Conference on Transport Phenomena In Multiphase Systems (HEAT 2008), June 30 - July 3, 2008, Bialystok, Poland.

  34、

Liu, D.-W, and Yang, C.-Y., 2007, “Effect of Nano-particles on Pool Boiling Heat Transfer of Refrigerant 141b,” The 5th International Conference on Nanochannels, Microchannels and Minichannels (ICNMM2007), June 18-20, 2007, Puebla, Mexico

  35、

Yang, C.-Y., Yeh, C.-T., and Lin, T.-Y., 2007, “Performance comparison of rectangular and air-foil shapes offset strip flow paths micro heat exchangers,” The 5th International Conference on Nanochannels, Microchannels and Minichannels (ICNMM2007), June 18-20, 2007, Puebla, Mexico.

  35、

Yang, C.-Y., 2006, “Heat Transfer Enhancement for Micro Heat Exchangers,” Annual meeting of Taiwan Thermal Management Association, Taipei. (keynote)

  36、

Yang, C.-Y. and Lin, T.-Y., 2006, “Heat Transfer Performance of Water Flow in Micro Tubes,” The 13th International Heat Transfer Conference, Sydney, Australia.

  37、

Yang, C.-Y., Yeh, C.-T., Liu, W.-C. and Yang, B.-C., 2006, “Advanced Micro Heat Exchangers for High Heat Flux,” The Fourth International Conference on Nanochannels, Microchannels and Minichannels (ICNMM2006), Limerick, Ireland. (keynote)

  38、

楊建裕、葉竣達、劉瑋輯、林廷祐,2005,「微小系統內之熱傳增強技術」,微冷卻技術研討會,中央大學,中壢市。

  39、

Yang, C.-Y. and Lin, T.-Y., 2005, “Measurement of Micro-tube Surface Temperature by the Method of Liquid Crystal Thermograph,” the 6th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, April 17-21, 2005, Miyagi, Japan. (Best paper of the micro-scale engineering session)

  40、

Lin, J.-C., Wu, J.-C., Yeh, C.-T., and Yang, C.-Y., 2004, “Fabrication and Performance Analysis of Metallic Micro Heat Spreader for CPU,” the 13th International Heat Pipe Conference, Shanghai, China, September 21 – 25, 2004.

  41、

Yang, C.-Y. and Yeh, C.-T., 2004, “Visualization of Pool Boiling on Smooth and Porous Surfaces within a Confined Space,” the 13th International Heat Pipe Conference, Shanghai, China, September 21 – 25, 2004.

  42、

Yang, C.-Y. and Liu, D.-W., 2004, “Pool Boiling on Plain and Enhanced Tubes of Refrigerant R-141b with Nano-particles,” No. 365, Proceedings of the 5th International Conference on Multiphase Flow, Yokohama, Japan, May 30 – June 4, 2004

  43、

Yang, C.-Y. and Fan, C.-F, 2003, “Nucleate Boiling Heat Transfer of Refrigerants R-134a and R-404a on Porous and Structured Surface Tubes,” pp. 381-386, Proceedings of the 4th International Conference on Compact Heat Exchangers and Enhancement Technology for the Process Industries, Crete Island, Greece, September 29-October 3, 2003

  44、

胡毓堂、楊建裕,2002,「噴霧熱傳增強冷凝器及空調機性能測試分析」,中國機械工程師學會第十九屆全國學術研討會,熱流與能源,虎尾技術學院,雲林。

  45、

柯召漢、張鄴文、葉竣達、楊建裕,2002,「微小熱管內流動現象觀察」,中國機械工程師學會第十九屆全國學術研討會,熱流與能源,虎尾技術學院,雲林。

  46、

葉竣達、楊建裕,2001,「半弧形無蕊式熱管熱傳性能實驗」,中國機械工程師學會第十八屆全國學術研討會,熱流與能源,台灣科技大學,台北。

  47、

褚耀宗、黃冠評、岳志傑、陳彥宏、楊建裕,2001,「扁平管平行流熱交換器之研製與性能比較」,中國機械工程師學會第十八屆全國學術研討會,熱流與能源,台灣科技大學,台北。

  48、

陳彥宏、謝文德、郭儒家、楊建裕,2001,「低溫自動化倉儲系統之實驗量測與電腦模擬研究」,中國機械工程師學會第十八屆全國學術研討會,熱流與能源,台灣科技大學,台北。

  49、

林建順、陳金賢、楊建裕,2001,「純冷媒R-134a及冷媒與潤滑油混合流體於小管內之性能比較」,中國機械工程師學會第十八屆全國學術研討會,熱流與能源,台灣科技大學,台北。

  50、

Yang, Chien-Yuh, Fan, Chih-feng and Chang, Fei-Peng “Effect of Fin Tip Radius for Film Condensation on Micro-fin Surfaces,” the 12th International Heat Transfer Conference, Grenoble, France, August 18 - 23, 2002.

  51、

Yang, Chien-Yuh and Chuan-Ta The, 2001, “Hear Transfer Performance of a Semi-arc Wickless Heat Pipe,” Proceedings of the 36th Intersociety Energy Conversion Engineering Conference, July 29 – August 2, Savannah, Georgia, U.S.A., pp. 1123 – 1129.

  52、

楊建裕,2001,「我國潔淨能源的發展與應用」,清潔生產研討會,中央大學,中壢市。

  53、

呂淑如、楊建裕,2000,「水及空氣在微小管內之壓降實驗分析」,中國機械工程師學會第十七屆全國學術研討會,熱流與能源,pp. 21-27,高雄第一科技大學,高雄。

  54、

楊建裕、岳志傑、沈坤奇,2000,「扁平管平行流空調機之研製」,第一屆高效率能源技術研討會,交通大學,新竹市。

  55、

Yang, Chien-Yuh, Chien, Hsin-Tang, Lu, Shu-Ru and Shyu, Ruey-Jong, 2000, “Friction Characteristics of Water R-134a and Air in Small Tubes,” Proceedings of the International Conference on Heat Transfer and Transport Phenomena in Microscale, October 15 – 20, Banff, Canada, pp. 168 – 174.

  56、

廖啟仲、楊建裕,1999,「冷媒R-134a在小管內之蒸發及凝結熱傳實驗分析比較」,中國機械工程師學會第十六屆全國學術研討會,熱流與能源,清華大學,新竹。

  57、

Yang, Chien-Yuh., Chung, Wen-Hsien, Hsu, Sen-Ming, 1999, “Heat Transfer of Liquid Refrigerant R-134a in Small Diameter Tubes,” Proceeding, Paper No. AJTE99/6521, The 5th ASME/JSME Thermal Engineering Joint Conference, March 15-19, San Diego, U.S.A..
計畫編號:NSC-86-2212-E-008-024

  58、

許晟銘、楊建裕,1998,「冷媒HFC-134a在小管內之蒸發熱傳實驗分析」,中國機械工程師學會第十五屆全國學術研討會,熱流與能源,pp. 213-219,成功大學,台南。

  59、

謝鎮州、楊建裕,1998,「水-空氣及兩相冷媒R-134a在微小管內之絕熱壓降實驗分析」,中國機械工程師學會第十五屆全國學術研討會,熱流與能源,pp. 205-211,成功大學,台南。

  60、

謝鎮州、楊建裕,1998,「水-空氣及冷媒R-134a在微小管內兩相流之流譜分析」,中國機械工程師學會第十五屆全國學術研討會,熱流與能源,pp. 167-174,成功大學,台南。

  61、

Yang, Chien-Yuh, 1998, “The Status and Prospect Solar Energy Utilization in Taiwan,” Invited Lecture, 1998-1999 APEC Energy R&D And Technology Transfer Seminar, Oct. 7-9, Okinawa, Japan.

  62、

楊建裕,1998,「再生能源的開發成本比較」,永續能源發展研討會,中央大學,中壢。

  63、

Yang, C.-Y., Chung, C.-C., and Chung, W.-H., 1998, "Condensation Heat Transfer in Small Diameter Tubes," the 3rd International Conference on Multiphase Flow, No. 349, pp. 1-7, June 8-12, Lyon, France.
計畫編號:NSC-86-2212-E-008-024

  64、

Yang, C.-Y., 1998, “The Technology And Strategy For Solar Energy Development In Taiwan Area,” Invited Lecture, 1997-1998 APEC Energy R&D And Technology Transfer Seminar, Part 3, pp. 1-7, May 18-20, Jakarta, Indonesia.

  65、

鍾志忠、楊建裕,1997,「冷媒HFC-134a在小圓管內之凝結熱傳實驗分析」,中國機械工程師學會第十四屆全國學術研討會,熱流與能源,pp. 139-144,中央大學,中壢。
計畫編號:NSC-86-2212-E-008-024

  66、

Webb, R. L., and Yang, C.-Y., 1995, "A comparison of R-12 and R-134a condensation inside small extruded aluminum plain and micro-fin tubes," SAE, Vehicle Thermal Management Systems Conference Proceedings, C496/053/95, pp. 77-85.